KH.jpg

E/Port & Eastham KH
'How To' Videos

Watch the videos below to illustrate

This video clip illustrates how to insert the black plastic key to the underside front corner with the plastic nib pointing inwards towards the fire alarm call point.

The glass face will fall inwards at the top of the glass and the fire alarm will sound. Remove/withdraw the black plastic key and reset the fire alarm panel as illustrated on a separate video clip No.2.

(The black plastic key is currently placed on the top of the fire alarm panel but if not they should be hung on the key hooks within the switch room)

No.1 

Fire Alarm Call Point Test

This video clip illustrates how to test the fire alarm panel using the key and test buttons.

After testing the fire alarm call point (above) which sounds the alarm follow the procedure below:

1.  Insert the key in the horizontal position.

2. Turn the key 1/4 turn to the vertical position and line up with the red dot marked 'Enable Controls'.

3. Then press the black button marked 'Silence Alarm'.

4. Return the key to the original horizontal position and withdraw.

(you may use the key turning it through to the red dot marked 'Evacuate' if you wish to carry out a fire alarm practice during occupation, to silence follow steps above)

No.2

Fire Alarm Panel Test

No.3

Intruder Alarm Panel Operation

Simply enter the code to either de-alarm or to alarm.

No.4

Hand Sanitiser Fitting Instructions

This video clip illustrates how to install the 'Clinell Touch Free Hand Sanitiser'. Once the video starts click on the full screen icon to the bottom right to enlarge the video. 

Full screen icon.png

No.5

Hand Sanitiser Cartridge Replacement Instructions

This video clip illustrates how to change the sanitiser cartridge for the 'Clinell Touch Free Hand Sanitiser'. Once the video starts click on the full screen icon to the bottom right to enlarge the video. 

Full screen icon.png